SBMS is proud to offer you access to the best manufacturing technologies from Europe.
Because equipment directly impacts the quality, productivity, and competitiveness of your products, we analyze your needs to provide you with customized solutions.
Our goal, to find the machinery that best meets your requirements for glass and insulating glass (IG).
The automatic spacer bender machine is suitable to bend aluminium and warm edge bars, without requiring the operator to modify the machine.
The automatic CSA2 desiccant filler machine performs the filling of spacer frames with desiccant. The machine is suitable for the filling of desiccant 3A in aluminium spacers, stainless steel spacers and warm edge spacers.
The machine process is fully automatic:
These are fully automated production lines used in the manufacturing of insulating glass units (IGUs). These lines handle glass washing, frame positioning, assembly — all in a continuous, high-efficiency process with minimal manual intervention.
Available models
M2001PA
Automatic line from 2000mm, 6 brushes,
with panel press and fixed exit.
M2501PA
Automatic line from 2500mm, 6 brushes,
with panel press and fixed exit.
These are fully automated production lines used in the manufacturing of insulating glass units (IGUs), which include a gas filling station to inject inert gases (like argon or krypton) between the glass panes.
The gas improves the thermal and acoustic insulation performance of the unit. These lines handle glass washing, frame positioning, assembly, gas filling, and sealing — all in a continuous, high-efficiency process with minimal manual intervention.
Available models
M2001PAGAS
Automatic line from 2000mm, 6 brushes,
with panel press, fixed exit and gas load.
M2501PAGAS
Automatic line from 2500mm, 6 brushes,
with panel press, fixed exit and gas load.
A butyl extruder is a piece of equipment used specifically in the production of insulating glass units (IGUs). It applies a butyl sealant (PIB) onto the edges of the spacer bars to ensure airtight and moisture-resistant sealing before assembling the glass panels.
Available model
M104-7
7 kg hydraulic butyl extruder.
A vertical washing machine is an equipment used to clean and dry flat glass sheets as they move vertically through rotating brushes and high-pressure water jets, typically before further processing such as lamination, or insulating glass assembly (IGUs).
Available models
M1500E
ECO vertical washing machine from 1500mm, open top,
4 brushes, with motorized output.
M2000E
ECO vertical washing machine from 2000mm, open top,
4 brushes, with motorized output.
M2000
STANDARD vertical washing machine
from 2000mm, 6 brushes.
M2500
STANDARD vertical washing machine
from 2500mm, 6 brushes.
M2800
STANDARD vertical washing machine
from 2800mm, 6 brushes.
M3300
STANDARD vertical washing machine
from 3300mm, 6 brushes.
A horizontal washing machine is equipment used to clean and dry flat glass sheets while they move horizontally on conveyor rollers, commonly used before tempering or lamination processes.
Available models
MH1000
STANDARD horizontal washing machine
from 1000mm, 6 brushes.
MH1600
STANDARD horizontal washing machine
from 1600mm, 6 brushes.
MH2000
STANDARD horizontal washing machine
from 2000mm, 6 brushes.
MH2600
STANDARD horizontal washing machine
from 2600mm, 6 brushes.
This machine is used to transport sealed unit frames (often made of aluminum or warm edge) between different stages of production — mainly between the application of the butyl joint and the spacer frame positioning on the glass.
It optimizes production, reduces manual handling, and improves the accuracy and safety of the process.
Available model
M134
Automatic profile transport.
This machine is used in the production of insulating glass units (IGUs) to semi-automatically move the panels during the last sealing, rotate them using a rotation table, and precisely handle them with 5 independent suction cups.
It facilitates the positioning, rotation, and transfer of IGUs, while reducing manual handling and improving efficiency and safety in the process.
Available model
M116-5
Rotating table with 5 independent suction cups.
This machine is used in the production of insulating glass units (IGUs) to mix and apply two-component sealants (such as polysulphide or silicone) with high precision. It operates pneumatically and uses 200 liters drum and 20 liters catalyst pail.
It ensures accurate, consistent, and continuous application of the secondary seal around the IGU, providing excellent insulation and long-term durability.
Available model
M106
200 liters two-component pneumatic extruder.
